Rear Housings and Axles
Auto Weld builds all types of rear housings from full Competition cars to Pro Street to customer’s specifications to special “shoot-out” cars. They are completely jig welded. Special fixtures allow us to put all brackets into alignment with the center section. They are offered as simple as a narrowed bar housing to a fully welded Competition rear housing, complete with brackets, brace, triangular support, fill and drain plugs, and made for the toughest applications and in any width, bolt circle, and brake register, (9″ type only). AUTO WELD can build any housing in any stage of completion that you could possibly need.
MANY OPTIONS ARE AVAILABLE!
HOUSINGS-4-LINK HOUSINGS-LADDER BAR
HOUSINGS-BRACE KITS-HOUSINGS BUILT TO
SPEC-SPOOL COMBO-AXLES-HOUSING
HARDWARE (ON THIS PAGE!!)
* BOLT-IN HOUSINGS
* REAR END PARTS
and thicker aftermarket 9″ Ford housing
cores. And also use the thicker and stronger 1/4″ wall “DOM” tubing for the axle tubes.
Shown below.
Above is an example of the differences
between the smaller 3″ diameter
axle tubes and the stronger
and larger 3 1/4″ diameter axle
tubes. Both used are the beefy 1/4″
wall “DOM” steel tubing.
Some applications may require
using the smaller 3″
axle tubes, but for most of our
rears we use the stronger
3 1/4″ axle tubes.
Here are a few tips so you can be
prepared BEFORE you order!!
All of our rears are welded in special
fixtures for absolute accuracy.100’s SOLD
Auto Weld’s Housing and
Axle Combo is STILL the
best buy in the U.S.A.!
Any width available!!
HOUSING, AXLES, BEARINGS, STUDS AND RETAINERS!! Discounted package price..$1295.00
FEATURES:
ENGINEERING RACING AXLES
**
* ANY WIDTH
**
* ANY SPLINE UP TO 35
(28,31,33,35 same price)
**
* 40 SPLINE AVAILABLE AT
AN ADDITIONAL $129.00
**
* ANY BOLT CIRCLE
(4 1/2″, 4 3/4″,5″)
**
* SET UP FOR ANY 9″
BRAKE REGISTER
OPTIONS:
WITH BEARINGS, STUDS, RETAINERS
COMBO
Part#1000……..$1295.00 (SAVE)
**** AXLE BEARINGS- 3″ STUDS,
RETAINER PACKAGE
Part#1230……..$110.00
**** AXLE BEARINGS- 5/8 STUD
KIT, RETAINER PACKAGE
Part#1231……..$180.00
**** 40 SPLINE UPGRADE
MUST SPECIFY
…Additional $129.00
**** (LABOR ONLY) TO WELD ALL
BRACKETS TO HOUSING 4-LINK &
LADDER BARS…$475.00
** 9″ FORD (bare)HOUSING, ANY WIDTH,
Part#1015…….$756.00
**** 9″ FORD HOUSING,
WITH BRACE INSTALLED
Part#1018…….$881.00
**NOTE: These prices only include up to
35 spline. 40 spline is available for
9″ Fords for an additional $129.00
***
***
OPTION
***
FABRICATED 9″ FORD
housing can be added to
any of the housings below
as an option. They are 3/16″
thick with 1/4″ thick axle
tubes.
#F9 option…$350.00
PRO STREET 4-LINK HOUSING
COMPETITION 4-LINK HOUSING
** BRACE INSTALLED (PARTS & LABOR)
Part#1030A…….$135.00
**
** 4-LINK BRACKETS & SHOCK MOUNTS
INSTALLED (LABOR ONLY)
Part#1031……..$475.00
**
** COMPETITION 4-LINK REAR PREP, INCLUDES:
FIXTURE WELDED REAR HOUSING,
4-LINK BRACKETS,SHOCK BRACKETS,& SUPPORT
BRACING, BRACE, AND DRAIN & FILL OPT.
When purchased with suspension kit
**
Part#1032-A…….$1305.00(discounted)
**
Purchased outright
Part#1032-B…….$1375.00(discounted)
“COMPETITION” LADDER BAR REAR HOUSING
** BRACE INSTALLED (PARTS & LABOR)
Part#1030…….$135.00
(Pictured below)
**
** LADDER BAR BRACKETS & SHOCK MOUNTS
INSTALLED (LABOR ONLY)
Part#1041…….$475.00
**
** COMPETITION (above) and PRO STREET (below)
LADDER BAR REAR PREP. INCLUDES:
REAR HOUSING, LADDER BAR BRACKETS, SHOCK
BRACKETS, & SUPPORT BRACING, REAR BRACE,
AND DRAIN & FILL OPT.
**
When purchased with suspension kit
Part#1042-A…….$1305.00 (discounted)
**
Purchased outright
Part#1042-B…….$1370.00 (discounted)
ROUND TYPE “PRO STREET” HOUSING WITH BRACE
——————————————-
**MUSTANG LADDER BAR HOUSING**
If you want dynamite traction on
your stock body Mustang, this is the
rear for you. Housing is already fixture
welded with all the mounts to ensure proper
alignment (when using stock frame rails). Order with our “Ladder Bar
Suspension Kits” and “Extreme Duty
Frame Connectors” and save! TRACTION
NEVER FELT SO GOOD!!
**
PART#1464-A..MUSTANG LADDER BAR HOUSING..$1160.00
(when ordered with suspension kit)
**
PART#1464-B..OUTRIGHT…………………$1222.00
(shown below)
** 9″ BRACE KIT,
FORD LEAF
part#1050…$85.00
** 9″ BRACE KIT,
FORD COIL
part#1051…$85.00
** 9″ BRACE KIT,
OLD STYLE
part#1052…$85.00
** 8-3/4″ BRACE KIT, MOPAR
part#1053….$85.00
FULL STOCK LENGTH REAR BRACE
(such as stock length Mustang)
available at….$98.00
** NARROW MOST HOUSINGS
part#1003…$268.00
**
** NARROW A HOUSING AND
BLAST CLEAN TO BARE METAL,
READY FOR PAINT
part#1004…$394.00
**
** ADD FILL & DRAIN (FILL
CAP ALUMINUM)
part#1005…$68.00
**** ADD BACK BRACE (MADE FROM
BOX TUBING)
part#1030A….$135.00
**
** ADD BRACE TO
STOCK LENGTH REARS
part#1030B….$155.00
**
** MOUNT 4-LINK BRACKETS AND SHOCK
MOUNTS (LABOR ONLY)
part#1031….$475.00
**** MOUNT LADDER BAR BRACKETS AND SHOCK
MOUNTS (LABOR ONLY)
part#1041….$475.00
**** LEAF SPRING PADS INSTALLED
(Ford and Mopar type)
part#1046….$65.00
**** GM LEAF SPRING PADS
INSTALLED (“T” bolt..”mono”
and “multi-leaf” type)
part#1047…$95.00
**
AUTO WELD’S 9″ HOUSING, RACE AXLE, AND
SPOOL COMBO IS PRACTICALLY A STEAL!!
GET THIS SPECIAL DISCOUNT PRICE WHEN
ORDERING HOUSING, AXLES, BEARINGS,
STUDS, RETAINERS, AND SPOOL.
**part#1055…$1771.00.00 (Discount!!)
and “Gun Drill” options.
**
**Lightening Flange Option…$85.00 per pair
**
**Gun Drill Option…$100 per pair
**
NHRA-IHRA LEGAL RACING AXLES
Special tempering
makes them ideal
for Pro Street also!
We like Moser
Engineering Axles
because they are
super tough for
racing, they
come with a
fantastic warranty,
and the hubs are
tempered in such a
way that you can
safely drive with
them on the street.
** FORD 9″-28 SPLINE
part#1210…$470.00
**
** FORD 9″-31 SPLINE
part#1211…$470.00
**
** FORD 9″-33 SPLINE
part#1212…$470.00
**
** FORD 9″-35 SPLINE
part#1213…$470.00
**
** FORD 9″-40 SPLINE
part#1214…$599.00
**
** CHEVY 12 BOLT-30 SPLINE
part#1215…$470.00
**
** CHEVY 12 BOLT-33 SPLINE
part#1216…$470.00
**
** DANA 60-35 SPLINE
part#1217…$470.00
**
** MOPAR 8-3/4-30 SPLINE
part#1218…$470.00
**
** MOPAR 8-3/4-35 SPLINE
part#1219…$470.00
**
NOTE: YOU MUST SPECIFY THE LENGTH OF
AXLES, BOLT CIRCLE, & BRAKE REGISTER.
IF YOU NEED ASSISTANCE, AUTO WELD
TECHS ARE ALWAYS AVAILABLE AND MORE
THAN HAPPY TO HELP!!!
** AXLE BEARING- 3.150 END,
1.772 BORE (EACH)
Part#1220…….$38.95
**** AXLE BEARING- 3.150 END,
1.531 BORE (EACH)
Part#1221…….$38.95
**** AXLE BEARING- 3.150 END,
1.563 BORE (EACH)
Part#1222…….$38.95
**
** AXLE BEARING- SMALL FORD,
2.893 END,1.563 BORE (EACH)
Part#1223…….$38.95
**
** AXLE BEARING- SMALL FORD,
2.893 END,1.378 BORE (EACH)
Part#1224…….$38.95
**
** AXLE BEARING- SMALL FORD,
2.893 END,1.531 BORE (EACH)
Part#1225…….$38.95
**
** AXLE BEARING- GM C-CLIP ELIMINATOR
USING STOCK AXLES
Part#1226…….$180.00
Above with axle studs..$200.00
**
** AXLE BEARING- MOPAR, 1.562 BORE
WITH RETAINER PLATE
Part#1227…….$48.95
**** BIG FORD BEARING RETAINER PLATE
(PIECE), NEW STYLE 3/8″ HOLES
Part#1228…….$8.00
(shown above)
**** BIG FORD BEARING RETAINER PLATE
(PIECE), OLD STYLE 1/2″ HOLES
Part#1229…….$8.00
**** AXLE BEARINGS, 1/2″ X 3″ STUDS,
RETAINER PKG
Part#1230…….$110.00
(shown above)
**** AXLE BEARINGS, 5/8″ STUDS,
RETAINER PKG
Part#1231…….$180.00
**NOTE: ( BSR pkg )includes:
1pr AXLE BEARINGS,1/2″x 3″ drag legal
AXLE STUDS, and 1pr axle RETAINERS
Only………..$110.00
when purchased with axles!
IF YOU WANT KILLER STRENGTH IN YOUR
WHEEL STUDS, THIS IS THE KIT FOR YOU!!
** PRESS-IN STUD KIT, 1/2x20x3,
.615 KNURL
Part#1232…….$32.95
** PRESS-IN STUD KIT, 7/16×3,
.480 KNURL
Part#1233…….$32.95
** PRESS-IN STUD KIT, 1/2x20x3,
PACK OF 10
Part#1234…….$32.95
** 5/8″ STUD KIT
Part#1235…….$105.00
(bottom picture above)