Rear End Parts
CENTER SECTIONS-RACE SPOOLS-LOCKERS-
PINION SUPPORTS-CASES-INSTALLATION-
PINION YOKES & U-BOLTS-POSI REBUILDS-
SPOOL BEARINGS-AND MORE!!!!
“DETROIT LOCKER” or “POSI”
CENTER SECTIONS
CENTER SECTIONS
Complete “Detroit Locker” or
“Posi” (trac-lock) center section
includes: Nodular Iron case,
aluminum pinion support, street
and strip gears, all new bearings,
seals and gasket, “Detroit Locker”
or “Posi” unit, and your choice
of gear ratio!
**
“Posi” (trac-lock) center section
includes: Nodular Iron case,
aluminum pinion support, street
and strip gears, all new bearings,
seals and gasket, “Detroit Locker”
or “Posi” unit, and your choice
of gear ratio!
**
**Detroit Locker center section
28-35 spline (must specify)
Part#1601…..$1865.00
**
**Posi(Trac-lock)center section
28 or 31 spline (must specify)
Part#1600…..$1660.00
28-35 spline (must specify)
Part#1601…..$1865.00
**
**Posi(Trac-lock)center section
28 or 31 spline (must specify)
Part#1600…..$1660.00
9″ Ultra Duty. Includes: Massive nodular
case, aluminum pinion support, bearings,
full race spool, new yoke, and your
choice of gear ratio.These center sections are needed for serious hi-horsepower cars and trucks.** NODULAR CENTER SECTION
Part#1602…$1540.00
**
** PRO GEAR OPTION
Part#1603…$230.00
(389 TO 486 RATIO)
**
** ALUMINUM CASE CENTER SECTION
Part#1604…$1595.00
ULTRA DUTY SPOOLS–LIFETIME GUARANTEE!!!* 9″ Ford Spool, 31 spline,
part#1610…$205.00
**
* 9″ Ford Spool, 33 spline,
part#1611…$205.00
**
* 9″ Ford spool, 35 spline,
part#1612…$205.00
**
** 9″ Ford spool, 40 spline,
part#1613…$205.00
**
* 12 bolt Chevy spool, 30 spline,
part#1614…$205.00
**
* 12 bolt Chevy spool, 33 spline,
part#1615…$205.00
**
* Dana spool, 35 spline, 4.56 & up,
part#1616…$210.00
**
* Dana spool, 35 spline, 4.10 & down,
part#1617…$210.00
**
* 8-3/4″ Mopar spool, 30 spline,
part#1618…$205.00
**
* 8-3/4″ Mopar spool, 35 spline,
part#1619…$205.00
These are bullet-proof posi for street
cars that see some duty on the track.
NOTE: For 35 spline, you have to use an
aftermarket 9″ Ford case!
** Detroit Locker, 31 spline
Part#1620…$675.00
**
** Detroit Locker, 35 spline
Part#1621…$675.00
Aluminum pinion supports are used when
you want maximum strength for pinion support.
** Standard pinion
Part#1622…$125.00
**
** Heavy Duty pinion (pro gear)
Part#1623…$140.00
Part#1622…$125.00
**
** Heavy Duty pinion (pro gear)
Part#1623…$140.00
“ALUMINUM 9″ FORD CASE”
Features a MASSIVE heavy duty Aluminum 9″ case with 3.25 bearing, and a through-bolt design and has ten (10)bolt holes for the Pinion Support.
***
Part#1625…Aluminum 3.25 case…$535.00
Our Nodular Case is one massive center
case, which is ideal for extreme duty
on the track. Features the Nodular 9″
case, steel caps, adjusters, and
3.250 bearing center.
Part#1626…Nodular 3.25 case…$395.00
This installation kit includes: Shims, pinion
bearings, crush sleeve , pinion nut and gasket,
etc. Everything you need to install your new
ring gear, even the tooth checking grease!Part#1630…INSTALLATION PACK (2.89) CASE
9″ FORD…$115.00
***
Part#1631…INSTALLATION PACK (35 SPLINE)
9″ FORD FOR
ALUMINUM PINION SUPPORT…$150.00
***
Part#1632…INSTALLATION PACK FOR
( Pro Gear) FORD…$199.00
***
Part#1633..GASKET…$8.00
***
***ADD FOR NASCAR PINION SPACER KIT..$25
THESE PINION YOKES ARE THE
FORGED HEAVY DUTY RACE
TYPE WITH U-BOLTS,
(accepts the larger 1350 u-joint)
**
* DANA 60 & 8-3/4″ MOPAR 29 SPLINE
Part#1640…$155.00
**
* 9″ FORD, 28 SPLINE
Part#1642…$140.00
**
* 9″ FORD, 35 SPLINE
Part#1643…$180.00
These high quality bearings can also be used
to replace the stock bearings for any
application. Each spool bearing set is:** ONLY!…$35.00/PAIRCHOICES:* 9″ FORD, 2.891 CASE
Part#1690…$34.95
* 9″ FORD, 3.062 CASE
Part#1691…$34.95
* 9″ FORD, 3.250 CASE
Part#1692…$34.95
* 12 BOLT CHEVY
Part#1693…$34.95
* DANA 60
Part#1694…$34.95
* 8-3/4 MOPAR
Part#1695…$34.95